Once the harness is connected to the new speaker, it can be mounted in place of the old one with the original screws.
Reassembly of the door trim – To reassemble the door panels, simply reverse the steps of the disassembly. First, make sure that all attachment clips are firmly attached to the door trim. Sometimes, some of them may remain in the door during disassembly.
Fastening clip: detail – Before replacing the trim, check that all fastening clips are in place.
Replacement of connectors and door opening control.
We then need to reconnect the connectors and the door opening mechanism that we disconnected for the disassembly.
Inserting the top of the door trim.
The next step is to replace the trim, starting with the upper part that will be inserted along the glass.
Door trim adjustment – Take care to align the door lock with the dedicated hole and check that the fixing clips are positioned correctly in front of your attachment point.
Press the trim to fit it into the door.
Then firmly press each of them to secure the panel to the door. A click is audible when the clips are inserted correctly.
Tighten the screws and install the door handle cover.
All that remains is to tighten the screws behind the opening mechanism and on the handle…
Replacement of the door handle finish.
… before replacing their respective caps in place.
Replace the screws under the door trim.
We finish by screwing the two screws under the door trim.
Focal Inside